2 Ways on How to Drain an Above Ground Pool

0

As a pool owner, you know that there are several reasons why you may need to completely drain the water from your above ground pool. In the following post we explain two methods to learn how to drain an above ground pool. Read and choose the one that is most suitable for you and your group.

Typically, if you need to completely drain your pool, there are likely to be other maintenance costs associated with it. It is very feasible to drain your above ground pool from start to finish. If you’re willing to put in the time and energy to remove the water yourself, it can be a cost-effective way to save money.

Choose your drainage method.

There are two main options pool owners typically choose when preparing to drain their above ground pool, an electric pump or a garden hose siphon. Either option will properly drain the water. It is a matter of preference, time and available equipment. Here is a summary of each drainage method and the steps required to complete the process.

Electric pool pump

  1. Submerge the pump intake hose under water, as close to the center of the pool as possible.
  2. Choose a space on your property to drain the pump outlet hose. This area should be away from the pool and the ground should be level to prevent flooding.
  3. Turn on the electric pump with clean and dry hands.
  4. When the pump begins to run, make sure the pool water level is dropping before leaving the equipment unattended while it drains.
  5. Check frequently in the pool to avoid flooding or equipment malfunction.
  6. An electric pump will not drain every liter of water from your pool. Turn off the pump once the water level is too low for it to drain any further, usually 6 inches from the bottom.

Garden hose siphon.

The draining process can be completed with a garden hose, but the more you use, the faster the water will drain. This method is called siphoning.

  1. Submerge each hose completely so it fills with the above ground pool water.
  2. Pull one end of the garden hose out of the pool and place it in an area with flat ground, where it won’t flood.
  3. Keep the other end of the hose submerged in the water and make sure the liquid starts to come out of the pool.
  4. Check the siphon frequently to make sure the water level continues to drop and there is no flooding. This process drains at a slower speed compared to an electric pump.
  5. Garden hose traps will not drain all the water from your pool. Remove the hoses once the water level remains stagnant, usually 6 inches from the bottom.

How to remove the remaining water from your above ground pool

Both of these drainage methods will not completely remove all of the water from the pool. There will be 6 inches of standing water at the bottom of your above ground pool, as outlined in the steps above. Removal of this extra fluid can be done using a variety of methods and tools, including:

  • Suck up excess water with a wet vacuum.
  • Sweeping the remaining water towards the pool drain.
  • Remove the liner from the pool frame, flip it over to discharge extra water onto the property.
  • How to clean the pool bottom without using a pool cleaner
  • vacuum suction

Things to consider while emptying your above ground pool

Although the process of removing water from your pool is simple, there are some risks associated with this maintenance process, specifically with the pool liner. If you are not draining your above ground pool to replace its liner, there are some important factors to consider before you begin to protect the integrity of your pool.

Sun damage

Your pool water helps protect the liner from any damage that can be caused by UV rays. Once the water is completely removed, your pool liner is at risk of warping due to the sun. Pool experts recommend draining your above ground pool when it’s cloudy outside.

Mold development

If you’re going to be dewatering to relocate or store your pool for the winter season, it’s important to take extra steps to prevent mold buildup on the pool liner. This common problem is caused by packing the liner before it is completely dry. Be sure to use towels or a wet vacuum to thoroughly dry the vinyl before putting it away for the season.

Loss of shape

Above ground pools hold their shape due to water . When approximately 75% of the liquid is drained, your pool will experience some loss of shape. It is important to protect the pool against collapse by draining it on a day when there are no strong winds or bad weather that could damage the empty pool.

Other considerations

The entire process of draining a pool is not simple and fast. It takes time, patience and a lot of effort. Before performing the download procedure, it is important to check some considerations. These are common things to consider when draining a pool:

  • Draining the pool means removing and restoring gallons of water. This could require quite a budget. So, run when you’re ready for the bill.
  • The pool must not be left empty for more than a week, max. Therefore, plan to discharge only when you have time to empty and replenish the pool.
  • Lastly, make sure the pool water you are draining does not contain high concentrations of chemicals. No matter where and how you drain that water, it shouldn’t be dangerous to anyone or anything.

Summary

Draining your above ground pool from start to finish is an easy way to reduce maintenance costs. Before you begin this process, it’s important to plan which drainage method you want to use, make sure you have the right equipment on hand, and look at the weather forecast to minimize the risk of damage.

Leave A Reply

Your email address will not be published.